The Netgear AC750 line of wifi range extenders features concurrent dual band 2.4Ghz and 5Ghz technologies. It can transmit data at a maximum rate of 750 Mbps, which helps to lessen network interference. It has two antennae and two wifi modes for enhanced wifi network coverage. You will be able to use your extender in two distinct modes once you have completed the Netgear AC750 Setup. Both extending your current network and setting up a new access point are possible with it. Let’s start the setup procedure.
Follow the setup instructions below for your Netgear AC750 device:
- Your Netgear AC750 setup must be turned on.
- Place it nearer your router at home.
- Watch for your AC750’s power LED to turn completely green.
- You must now take any mobile device.
- Connect the current network with a device that supports wifi.
- Go to www.mywifiext.net in your web browser.
- Visit the New Extender Setup page.
- To complete the setup process, adhere to the on-screen prompts.
- When it’s finished, remove the booster from the wall and re-plug it between the dead zone and your wifi router.
This is how to manually configure your Netgear AC750. However, there are more configuration options outside the manual technique, such as WPS Setup. The WPS technique to configure your repeater will be covered in the following blog.
Netgear AC750 Setup Via WPS Method
Let’s learn about a different configuration method for your Netgear AC750 Setup , known as Wireless Protected Setup (WPS), which is regarded as the quickest way to set up your repeater. It won’t take more than 2-4 minutes to complete Netgear AC750 WPS Setup. Let’s examine the proper method for completing this setup.
The steps for Netgear AC750 WPS Setup are as follows:
- Start the Netgear AC750.
- Place it next to the current router.
- Wait until your AC750’s power LED glows a bright, solid green.
- On the booster, press the WPS button.
- After a minute, push the WPS button on the main router as well.
- When your booster displays three consecutive solid green lights, the configuration is complete.
- It is now time to unplug your AC750 and set it up in the area with dead spots.
That’s how, in just two minutes, you can install your Netgear AC750 setup on the mywifiext.net login page without having to input any personal information like a passcode, username, or SSID. We’ll go over how to upgrade the extender’s firmware in the following blog.
Troubleshooting Steps for Netgear AC750 Setup Issues
Follow the troubleshooting instructions listed below to solve Netgear AC750 setup issues:
- Make that the extension is getting the right amount of power from the wall outlet.
- Verify that the wall plug is not broken or short-circuited before plugging in the extender.
- Get a high-speed internet connection with your device.
- Verify each and every electrical connection. Use only undamaged cables.
- Avoid placing your extender near things like microwaves, fish tanks, cordless phones, room corners, metal objects, walls, and walls, as well as aluminium studs.
- Use only the most recent version of your web browser to log into My WiFiext.net.
- Try setting up your Netgear extender once more after doing a power cycle.
- Update the most recent Netgear firmware on your extender.
- Set the extender’s settings back to the factory defaults.
Any of the above-mentioned troubleshooting tips failed to address your issues? Do not worry.Simply get in touch with us to solve any Netgear AC750 Extender configuration problems.
Netgear AC750 firmware update
Have you noticed any issues with the functionality or bad behaviour of your extender? If so, you should update to the most recent version of the firmware that NETGEAR offers.The Netgear AC750 firmware Update on your booster, you will have access to the newest features and security patches, which will help you optimise the functionality of your AC750 and address any faults.
Follow the steps below to upgrade the firmware on a Netgear AC750:
- By inserting it into a power outlet, first switch on your Netgear AC750.
- A close distance should exist between your repeater and current router.
- Navigate to www.mywifiext.net using any web browser.
- When prompted, enter your SSID, username, and password.
- To upgrade the firmware, select the settings option.
- Never unplug your AC750 while the update is running.
You can upgrade your Netgear AC750’s firmware to the most recent version by following these instructions. We’ll discuss how to perform a factory reset in the following blog.
Netgear AC750 Setup Factory Reset
You will need to follow the Netgear AC750 firmware upgrade procedure if you can’t remember your admin password or username and you wish to retrieve it. Your extender will be made ready for the new installation procedure once you complete a factory reset operation. This operation will wipe all the personalised data from your extender, including your password, user name, and SSID. So let’s start the reset process.
The steps to reset a Netgear AC750 are as follows:
- Turn on your Netgear AC750.
- On your extender, locate the reset button.
- It is accessible through a small hole on the side of the AC750.
- Pick up a pin or a needle with a sharp point.
- Using a pin, push the reset button for 10 seconds.
- Take it out ten seconds later.
- You have successfully completed the factory reset procedure in this manner.
You can contact us via live chat or our toll-free hotline if you need assistance with the setup, update, or reset procedure. You can get help from our technical staff to address any problems.
